Omni Energy Supply sealed dry room with observation windows and an entry airlock

CONTROLLED ENVIRONMENTS

Sealed dry room.
Built for sensitive work.

MKA302-000-00

A modular, low-leakage dry environment for solid-state battery pilot lines and humidity-sensitive laboratories.

01 / System composition

One integrated dry environment.

A sealed stainless-steel enclosure, desiccant-wheel dehumidifier, water-removal purification system, cooling system, sealed stainless-steel piping and electrical controls.

Numbered dry-room component diagram showing the enclosure, airlock, windows, transfer interfaces, purification system, dehumidifier, chiller and piping
System composition · numbered component reference

SYSTEM COMPONENTS

  1. Sealed dry-room enclosure
  2. Airlock door
  3. Observation window
  4. Small tool-transfer chamber
  5. Water-removal purification system
  6. Material-transfer channel interface
  7. Desiccant-wheel dehumidifier
  8. Air-cooled water chiller
  9. Supply-air piping
  10. Return-air piping

02 / Operating principle

Controlled air. A closed circulation path.

Wheel dehumidification brings the enclosure to its target dew point. Molecular-sieve circulation then maintains low humidity with reduced dehumidifier demand.

Sealed dry room air-treatment and regeneration circuitFresh air passes through an initial filter, pre-cooling coil, first desiccant wheel, supply fan, intermediate cooling coil, second desiccant wheel, post-cooling coil and medium-efficiency filter to the dry room. Return air feeds two points before and after the first wheel. Separate regeneration air paths pass through heaters and the wheels to exhaust. Fresh airInitial filterPre-coolingcoilFirst wheelSupply fanIntermediatecooling coilSecond wheelPost-cooling coilMedium-efficiencyfilterDry roomReturn airProcess / positive-pressure exhaustSupply airRegeneration exhaustRegenerationheater 1RegenerationfanRegenerationmake-up airRegenerationheater 2H1H2
Air treatment & regenerationReturn-air circulation
Air-treatment circuit translated from the product reference. H1 and H2 indicate the secondary return-air connections. Molecular-sieve purification is described below and is not shown in this wheel-unit circuit.
01 / INITIAL DRYING

Reach the target dew point.

The desiccant-wheel dehumidifier lowers the dry-room dew point. The circuit combines filtration, cooling, wheel drying and return-air connections, while a separate regeneration stream restores the desiccant.

02 / HUMIDITY MAINTENANCE

Maintain dryness through circulation.

Once the target is reached, isolation valves close and molecular-sieve circulation maintains low humidity with reduced wheel-unit power. The sealed enclosure limits moisture ingress and supports lower energy demand.

03 / Performance indicators

Dryness that lasts.
Energy use that falls.

The sealed enclosure reduces moisture ingress, helping maintain a low dew point while reducing the demand on its dehumidification system.

IDLE WATER CONTENT

<20ppm

Low moisture. Stable conditions.

Water content maintained below 20 ppm under idle conditions.

NORMAL OPERATION

50%

Less energy during operation.

Energy savings under normal operating conditions.

IDLE OPERATION

>90%

Greater savings when idle.

Energy savings under idle operating conditions.

Performance figures are those stated for the source product; operating conditions and configuration affect results.

START A PROJECT

Let’s build your next battery solution.

Tell us what you’re building. Our California-based team will help connect the right materials, equipment, and process support.

  • Materials and process matching
  • Equipment configuration guidance
  • Project quotation and lead-time review
Our team will review your inquiry and follow up.

Tell us about your project

Share a few details so we can prepare the right next step.

Required fields

Your information will only be used to respond to this inquiry.